Manoeuvring in limited
spaces.

Manoeuvring your caravan into difficult, cramped positions
suddenly becomes childsplay with the
Mover S. You just manually
engage the two sides of the drive, and then you can direct
your caravan by remote control.
- Extremely easy manual engagement or
disengagement from one side
- Remote control manoeuvring
- Weighs 35 kg: up to 15 % than comparable
manoeuvring systems
- For use with single-axle caravans
up to 1,800 kg
| Mover
S |
| Power Supply |
12V |
| Weight |
35 kg
incl. cross actuation device |
Comfortable manoeuvring with
single-axle caravans.

This luxury manoeuvring system requires no external forces.
It is engaged at the touch of a button and is henceforth in
place. Manoeuvring doesnt get any easier than this.
- Electrically engaged or disengaged
by
remote control
- Weighs 33 kg: up to 15 % lighter than
comparable manoeuvring systems
- For use with single-axle caravans
up to 1,800 kg
| Mover
S |
| Power Supply |
12V |
| Weight |
33 kg |
Powerful manoeuvring with double-axle
caravans.

With the Mover TE,
you can even manoeuvre
heavyweights up to 2,250 kg into position with a touch of
the remote controls button. The sophisticated rotational
mechanism means that the tyres are not subjected to excessive
wear, even when turning!
- Electrically engaged or disengaged
by
remote control
- Weighs 33 kg: up to 50 % lighter than
comparable manoeuvring systems
- For use with double-axle caravans
up to 2,250 kg
| Mover
S |
| Power Supply |
12V |
| Weight |
33 kg |
NEW! The
Mover PowerSet*.
This unique, optimally configured set comprises
the CALIRA charger and
OPTIMA® battery.
The
benefits to you: up to 50 % longer moving time.
More than double as fast charging time. Lowest
self-discharge and 20 % weight reduction with
equal effective battery capacity.
* Only available in conjunction with
a
Mover S/SE or TE.
Click
here to download information on the
Truma Mover family (pdf format)
|
|
To make your search for the right
caravan mover for you easier, please see the key feature bullet
points below:
- For use on single axle caravans.
- Powerful drive for caravans up to
1600KG in weight, even on difficult surfaces and uneven
terrain (including gravel, sand, grass, tarmac, snow and
many others).
- Is fitted using a clamp system meaning
NO requirement to drill or weld anything to the caravan
chassis. (This also makes the mover interchange when swapping
caravan!)
- Radio remote control for safe and
accurate manoeuvring using an FM signal.
- Simple 12V electrical installation
utilising your existing leisure battery.
- Cross actuation kits available to
enable you to engage both drive rollers from one side of
your caravan.
- Enables to move your caravan around
its axis (360oc).
- Improved and durable gritted rollers
for tyre friendly use.
- Weight 30KG (plus an additional 5KG
if opting for cross actuation).
- Average power consumption of 15A.
- Quiescent current consumption: >15mA.
- A 1200KG climbing capability on a
25% gradient.
- Operational speed of approx 30 cm/sec.
- Recommended battery of 85Ah minimum.
- Maximum tyre width: 205mm.
- Spring loaded cross actuation using
an engagement bar.
- Good ground clearance minimising the
risk of catching your caravan mover.
Click
here to download information on the
Original Caravan Mover by Truma (pdf format)

Queries: sales@espar.co.uk
Tel:
(01752) 491900
Fax:
(01752) 491910
Tel: (01628)
471368
Fax:
(01628) 474819
|